###
### Tue Jan 27 15:37:27 EST 2004:
### bmake bulk-package for ipv6calc-0.46nb1
### Current pkg count:  8 installed packages: digest-20021220 gettext-lib-0.11.5nb2 gmake-3.80nb2 libiconv-1.9.1nb1 libtool-base-1.4.20010614nb19 patch-2.5.4nb2 pkg_install-info-4.5nb2 xpkgwedge-1.9
###
BULK> Full rebuild in progress...
BULK> Cleaning package and its depends
===> Cleaning for ipv6calc-0.46nb1
===> Cleaning for openssl-0.9.6l
===> Cleaning for perl-5.6.1nb10
===> Cleaning for patch-2.5.4nb2
===> Cleaning for gmake-3.80nb2
===> Cleaning for pkg_install-info-4.5nb2
===> Cleaning for gettext-lib-0.11.5nb2
===> Cleaning for libiconv-1.9.1nb1
===> Cleaning for libtool-base-1.4.20010614nb19
BULK> Removing installed packages which are not needed to build ipv6calc-0.46nb1
BULK> Keeping BULK_PREREQ: xpkgwedge-1.9 (pkgtools/xpkgwedge)
BULK> ipv6calc-0.46nb1 requires installed package digest-20021220 (pkgtools/digest
pkgtools/rdigest) to build.
BULK> ipv6calc-0.46nb1 requires installed package patch-2.5.4nb2 (devel/patch) to build.
BULK> ipv6calc-0.46nb1 requires installed package libiconv-1.9.1nb1 (converters/libiconv) to build.
BULK> ipv6calc-0.46nb1 requires installed package gettext-lib-0.11.5nb2 (devel/gettext-lib) to build.
BULK> ipv6calc-0.46nb1 requires installed package pkg_install-info-4.5nb2 (pkgtools/pkg_install-info) to build.
BULK> ipv6calc-0.46nb1 requires installed package gmake-3.80nb2 (devel/gmake) to build.
BULK> ipv6calc-0.46nb1 requires installed package libtool-base-1.4.20010614nb19 (devel/libtool-base) to build.
BULK> Installing packages which are required to build ipv6calc-0.46nb1.
BULK> /usr/pkg/sbin/pkg_add -K /var/db/pkg  /packages/SunOS/5.9/sparc/All/openssl-0.9.6l.tgz

===> Installing configuration/support files for openssl-0.9.6l

	/usr/pkg/etc/openssl/openssl.cnf

===========================================================================
You may wish to customize the following files for openssl-0.9.6l:

	/usr/pkg/etc/openssl/openssl.cnf
===========================================================================

===========================================================================
$NetBSD: MESSAGE,v 1.5 2003/09/22 03:13:58 grant Exp $

If upgrading from SSLeay, you will need to copy your ssleay.cnf (used for
creating certificate requests with "ca") into
/usr/pkg/etc/openssl/openssl.cnf.

If installing from scratch, you may want to take a look
at /usr/pkg/share/examples/openssl/openssl.cnf copy it
to /usr/pkg/etc/openssl/openssl.cnf, and customize it.

===========================================================================

BULK> /usr/pkg/sbin/pkg_add -K /var/db/pkg  /packages/SunOS/5.9/sparc/All/perl-5.6.1nb10.tgz

===========================================================================
$NetBSD: MESSAGE,v 1.4 2004/01/08 19:18:00 jlam Exp $

perl-5.6.1nb10 will use the following directory as the default
location of the site-specific Perl modules:

	/usr/pkg/lib/perl5/site_perl/5.6.1

===========================================================================

BULK> Required package patch-2.5.4nb2 (devel/patch) is already installed
BULK> Required package gmake-3.80nb2 (devel/gmake) is already installed
BULK> Required package pkg_install-info-4.5nb2 (pkgtools/pkg_install-info) is already installed
BULK> Required package gettext-lib-0.11.5nb2 (devel/gettext-lib) is already installed
BULK> Required package libiconv-1.9.1nb1 (converters/libiconv) is already installed
BULK> Required package libtool-base-1.4.20010614nb19 (devel/libtool-base) is already installed
BULK> Required package xpkgwedge-1.9 (pkgtools/xpkgwedge) is already installed
BULK> Required package digest-20021220 (pkgtools/digest) is already installed
bmake package (ipv6calc-0.46nb1)
===> Checking for vulnerabilities in ipv6calc-0.46nb1
=> ipv6calc-0.46.tar.gz doesn't seem to exist on this system.
=> Attempting to fetch ipv6calc-0.46.tar.gz from ftp://ftp.bieringer.de/pub/linux/IPv6/ipv6calc/.
=> [338497 bytes]
Trying 2001:7b0:1101:2::146:3...
ftp: bind: Cannot assign requested address
=> Attempting to fetch ipv6calc-0.46.tar.gz from ftp://ftp.fi.netbsd.org/pub/NetBSD/packages/distfiles/.
=> [338497 bytes]
=> Checksum OK for ipv6calc-0.46.tar.gz.
work.sol9 -> /work/pkgbuild/net/ipv6calc/work.sol9
===> Extracting for ipv6calc-0.46nb1
===> Required installed package openssl>=0.9.6l: openssl-0.9.6l found
===> Required installed package gmake>=3.78: gmake-3.80nb2 found
==========================================================================
The following variables will affect the build process of this package,
ipv6calc-0.46nb1.  Their current value is shown below:

        * SSLBASE = /usr/pkg
        * SSLCERTS = /usr/pkg/etc/openssl/certs

You may want to abort the process now with CTRL+C and change their value
before continuing.  Be sure to run `bmake clean' after the changes.
==========================================================================
===> Patching for ipv6calc-0.46nb1
===> Applying pkgsrc patches for ipv6calc-0.46nb1
===> Overriding tools for ipv6calc-0.46nb1
===> Buildlinking for ipv6calc-0.46nb1
===> Configuring for ipv6calc-0.46nb1
loading cache ./config.cache
checking for gawk... (cached) gawk
checking for gcc... (cached) gcc
checking whether the C compiler (gcc -O -I/usr/pkg/include  -L/usr/pkg/lib -Wl,-R/usr/pkg/lib) works... yes
checking whether the C compiler (gcc -O -I/usr/pkg/include  -L/usr/pkg/lib -Wl,-R/usr/pkg/lib) is a cross-compiler... no
checking whether we are using GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking whether /usr/pkg/bin/gmake sets ${MAKE}... yes
checking how to run the C preprocessor... (cached) gcc -E
checking for ANSI C header files... (cached) yes
checking for openssl/md5.h... (cached) yes
checking for MD5_Init in -lcrypto... (cached) yes
checking for MD5_Update in -lcrypto... (cached) yes
checking for MD5_Final in -lcrypto... (cached) yes
checking for working const... (cached) yes
checking for off_t... (cached) yes
checking for size_t... (cached) yes
checking for 8-bit clean memcmp... (cached) yes
checking for strspn... (cached) yes
checking for strstr... (cached) yes
updating cache ./config.cache
creating ./config.status
creating Makefile
creating version.h
creating contrib/ipv6calc.spec
creating config.h
config.h is unchanged
===> Building for ipv6calc-0.46nb1
cd getopt/ && make
make[1]: Entering directory `/work/pkgbuild/net/ipv6calc/work.sol9/ipv6calc-0.46/getopt'
gcc -O2 -Wall -g -Igetopt/ -fPIC -o getopt1.o -c -s getopt1.c
cc: Warning: option -2 passed to ld
cc: illegal option -Wall
make[1]: *** [getopt1.o] Error 1
make[1]: Leaving directory `/work/pkgbuild/net/ipv6calc/work.sol9/ipv6calc-0.46/getopt'
gmake: *** [getopt-make] Error 2
*** Error code 2

Stop.
bmake: stopped in /usr/pkgsrc/net/ipv6calc
*** Error code 1

Stop.
bmake: stopped in /usr/pkgsrc/net/ipv6calc
BULK> ipv6calc-0.46nb1 was marked as broken:
-rw-r--r--   1 root     other       6923 Jan 27 15:38 .broken.html
bmake deinstall
===> Deinstalling for ipv6calc
BULK> Marking all packages which depend upon ipv6calc-0.46nb1 as broken:
BULK> Build for ipv6calc-0.46nb1 was not successful, aborting.