###
### Tue Jul 6 02:48:25 CEST 2004:
### /usr/pkg/bin/bmake bulk-package for libjit-0.0.2
### Current pkg count:  4 installed packages: digest-20021220 libhfs-3.2.6 libtool-base-1.5.6nb1 patch-2.5.4nb2
###
BULK> Full rebuild in progress...
BULK> Cleaning package and its depends
===> Cleaning for libjit-0.0.2
===> Cleaning for pkg_install-info-4.5nb2
===> Cleaning for libtool-base-1.5.6nb1
===> Cleaning for patch-2.5.4nb2
===> Cleaning for gmake-3.80nb3
===> Cleaning for gettext-lib-0.11.5nb3
===> Cleaning for libiconv-1.9.1nb2
BULK> Removing installed packages which are not needed to build libjit-0.0.2
BULK> Keeping BULK_PREREQ: digest-20021220 (pkgtools/digest)
/usr/pkg/sbin/pkg_delete -K /var/db/pkg -r libhfs-3.2.6
BULK> libjit-0.0.2 requires installed package libtool-base-1.5.6nb1 (devel/libtool-base) to build.
BULK> libjit-0.0.2 requires installed package patch-2.5.4nb2 (devel/patch) to build.
BULK> Installing packages which are required to build libjit-0.0.2.
BULK>  /usr/pkg/sbin/pkg_add -K /var/db/pkg  /packages/All/pkg_install-info-4.5nb2.tgz
BULK> Required package libtool-base-1.5.6nb1 (devel/libtool-base) is already installed
BULK> Required package patch-2.5.4nb2 (devel/patch) is already installed
BULK>  /usr/pkg/sbin/pkg_add -K /var/db/pkg  /packages/All/gmake-3.80nb3.tgz

===> Installing configuration/support files for libiconv-1.9.1nb2

	/usr/pkg/lib/charset.alias
BULK> Required package gettext-lib-0.11.5nb3 (devel/gettext-lib) is already installed
BULK> Required package libiconv-1.9.1nb2 (converters/libiconv) is already installed
BULK> Required package digest-20021220 (pkgtools/digest) is already installed
/usr/pkg/bin/bmake package (libjit-0.0.2)
===> Checking for vulnerabilities in libjit-0.0.2
=> libjit-0.0.2.tar.gz doesn't seem to exist on this system.
=> Attempting to fetch libjit-0.0.2.tar.gz from ftp://ftp.cz.NetBSD.org/pub/NetBSD/packages/distfiles/.
=> [523897 bytes]
=> Checksum OK for libjit-0.0.2.tar.gz.
work -> /pkgbuild/devel/libjit/work
===> Extracting for libjit-0.0.2
===> Required installed package pkg_install-info-[0-9]*: pkg_install-info-4.5nb2 found
===> Required installed package libtool-base>=1.5.2nb4: libtool-base-1.5.6nb1 found
===> Required installed package gmake>=3.78: gmake-3.80nb3 found
===> Required installed package patch>=2.2: patch-2.5.4nb2 found
===> Patching for libjit-0.0.2
===> Applying pkgsrc patches for libjit-0.0.2
===> Overriding tools for libjit-0.0.2
===> Buildlinking for libjit-0.0.2
===> Configuring for libjit-0.0.2
creating cache ./config.cache
checking host system type... sparc-sun-solaris2
checking target system type... sparc-sun-solaris2
checking build system type... sparc-sun-solaris2
checking for a BSD compatible install... /usr/ucb/install -c -o root -g root
checking whether build environment is sane... yes
checking whether gmake sets ${MAKE}... yes
checking for working aclocal... found
checking for working autoconf... found
checking for working automake... found
checking for working autoheader... found
checking for working makeinfo... missing
checking if building for some Win32 platform... no
checking for gawk... /usr/bin/nawk
checking for gcc... cc
checking whether the C compiler (cc -O -R/usr/pkg/lib) works... yes
checking whether the C compiler (cc -O -R/usr/pkg/lib) is a cross-compiler... no
checking whether we are using GNU C... no
checking whether cc accepts -g... yes
checking for c++... CC
checking whether the C++ compiler (CC -O -R/usr/pkg/lib) works... yes
checking whether the C++ compiler (CC -O -R/usr/pkg/lib) is a cross-compiler... no
checking whether we are using GNU C++... no
checking whether CC accepts -g... yes
checking for a BSD compatible install... /usr/ucb/install -c -o root -g root
checking whether ln -s works... yes
checking whether gmake sets ${MAKE}... (cached) yes
checking for bison... yacc
checking how to run the C preprocessor... cc -E
checking for flex... no
checking for lex... lex
checking for flex... (cached) lex
checking for yywrap in -ll... yes
checking lex output file root... lex.yy
checking whether yytext is a pointer... no
checking for ranlib... ranlib
checking for non-GNU ld... /pkgbuild/devel/libjit/work/.buildlink/bin/ld
checking if the linker (/pkgbuild/devel/libjit/work/.buildlink/bin/ld) is GNU ld... no
checking for BSD-compatible nm... /usr/ccs/bin/nm -p
updating cache ./config.cache
checking whether we are using GNU C... no
checking for object suffix... o
checking for executable suffix... no
checking for cc option to produce PIC... -KPIC
checking if cc PIC flag -KPIC works... yes
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.lo... no
checking if cc static flag -Bstatic works... -Bstatic
checking if the linker (/pkgbuild/devel/libjit/work/.buildlink/bin/ld) is GNU ld... no
checking whether the linker (/pkgbuild/devel/libjit/work/.buildlink/bin/ld) supports shared libraries... yes
checking command to parse /usr/ccs/bin/nm -p output... ok
checking how to hardcode library paths into programs... immediate
checking for /pkgbuild/devel/libjit/work/.buildlink/bin/ld option to reload object files... -r
checking dynamic linker characteristics... solaris2 ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for objdir... .libs
creating libtool
loading cache ./config.cache
checking for Cygwin environment... no
checking for mingw32 environment... no
checking for executable suffix... no
checking for object suffix... o
checking for ANSI C header files... yes
checking for string.h... yes
checking for strings.h... yes
checking for memory.h... yes
checking for stdlib.h... yes
checking for stdarg.h... yes
checking for varargs.h... yes
checking for tgmath.h... no
checking for math.h... yes
checking for ieeefp.h... yes
checking for pthread.h... yes
checking for unistd.h... yes
checking for sys/types.h... yes
checking for sys/mman.h... yes
checking for fcntl.h... yes
checking for dlfcn.h... yes
checking for sys/cygwin.h... no
checking for sys/stat.h... yes
checking for working const... yes
checking if char is unsigned... no
checking size of char... 1
checking size of short... 2
checking size of int... 4
checking size of long... 4
checking size of long long... 8
checking size of __int64... 0
checking size of float... 4
checking size of double... 8
checking size of long double... 16
checking size of void *... 4
checking for the 8-bit integer types... char, unsigned char
checking for the 16-bit integer types... short, unsigned short
checking for the 32-bit integer types... int, unsigned int
checking for the 64-bit integer types... long long, unsigned long long
checking for the native integer types... int, unsigned int
checking for the 32-bit floating-point type... float
checking for the 64-bit floating-point type... double
checking for the native floating-point type... long double
checking for C++ exception handling option... none needed
checking for C++ throw() idiom... yes
checking for -fno-gcse option... no
checking for -lstdc++ option... no
checking for sin in -lm... yes
checking for dlopen in -ldl... yes
checking for pthread_create in -lpthread... yes
checking for 8-bit clean memcmp... yes
checking for memset... yes
checking for memcmp... yes
checking for memchr... yes
checking for memcpy... yes
checking for memmove... yes
checking for bcopy... yes
checking for bzero... yes
checking for bcmp... yes
checking for strlen... yes
checking for strcpy... yes
checking for strcat... yes
checking for strncpy... yes
checking for strcmp... yes
checking for strncmp... yes
checking for strchr... yes
checking for strrchr... yes
checking for vsprintf... yes
checking for vsnprintf... yes
checking for _vsnprintf... no
checking for getpagesize... yes
checking for isnan... yes
checking for isinf... no
checking for finite... yes
checking for fmod... yes
checking for remainder... yes
checking for drem... no
checking for ceil... yes
checking for floor... yes
checking for acos... yes
checking for asin... yes
checking for atan... yes
checking for atan2... yes
checking for cos... yes
checking for cosh... yes
checking for exp... yes
checking for log... yes
checking for log10... yes
checking for pow... yes
checking for sin... yes
checking for sinh... yes
checking for sqrt... yes
checking for tan... yes
checking for tanh... yes
checking for isnanf... yes
checking for isinff... no
checking for finitef... no
checking for fmodf... no
checking for remainderf... no
checking for dremf... no
checking for ceilf... no
checking for floorf... no
checking for acosf... no
checking for asinf... no
checking for atanf... no
checking for atan2f... no
checking for cosf... no
checking for coshf... no
checking for expf... no
checking for logf... no
checking for log10f... no
checking for powf... no
checking for sinf... no
checking for sinhf... no
checking for sqrtf... no
checking for tanf... no
checking for tanhf... no
checking for isnanl... no
checking for isinfl... no
checking for finitel... no
checking for fmodl... no
checking for remainderl... no
checking for dreml... no
checking for ceill... no
checking for floorl... no
checking for acosl... no
checking for asinl... no
checking for atanl... no
checking for atan2l... no
checking for cosl... no
checking for coshl... no
checking for expl... no
checking for logl... no
checking for log10l... no
checking for powl... no
checking for sinl... no
checking for sinhl... no
checking for sqrtl... no
checking for tanl... no
checking for tanhl... no
checking for dlopen... yes
checking for cygwin_conv_to_win32_path... no
checking for mmap... yes
checking for munmap... yes
checking for mprotect... yes
checking for working alloca.h... yes
checking for alloca... yes
updating cache ./config.cache
creating ./config.status
creating Makefile
creating include/Makefile
creating include/jit/Makefile
creating include/jit/jit-defs.h
creating tools/Makefile
creating jit/Makefile
creating jitdynamic/Makefile
creating jitplus/Makefile
creating dpas/Makefile
creating tutorial/Makefile
creating tests/Makefile
creating doc/Makefile
creating config.h
===> Building for libjit-0.0.2
cd . \
  && CONFIG_FILES=Makefile CONFIG_HEADERS= /bin/ksh ./config.status
creating Makefile
cd . && autoheader
WARNING: `autoheader' is missing on your system.  You should only need it if
         you modified `acconfig.h' or `configure.in'.  You might want
         to install the `Autoconf' and `GNU m4' packages.  Grab them
         from any GNU archive site.
cd . \
  && CONFIG_FILES= CONFIG_HEADERS=config.h \
     /bin/ksh ./config.status
creating config.h
config.h is unchanged
/usr/pkg/bin/gmake  all-recursive
gmake[1]: Entering directory `/pkgbuild/devel/libjit/work/libjit-0.0.2'
Making all in include
gmake[2]: Entering directory `/pkgbuild/devel/libjit/work/libjit-0.0.2/include'
cd .. \
  && CONFIG_FILES=include/Makefile CONFIG_HEADERS= /bin/ksh ./config.status
creating include/Makefile
gmake[2]: Leaving directory `/pkgbuild/devel/libjit/work/libjit-0.0.2/include'
gmake[2]: Entering directory `/pkgbuild/devel/libjit/work/libjit-0.0.2/include'
Making all in jit
gmake[3]: Entering directory `/pkgbuild/devel/libjit/work/libjit-0.0.2/include/jit'
cd ../.. \
  && CONFIG_FILES=include/jit/Makefile CONFIG_HEADERS= /bin/ksh ./config.status
creating include/jit/Makefile
gmake[3]: Leaving directory `/pkgbuild/devel/libjit/work/libjit-0.0.2/include/jit'
gmake[3]: Entering directory `/pkgbuild/devel/libjit/work/libjit-0.0.2/include/jit'
cd ../.. && CONFIG_FILES=include/jit/jit-defs.h CONFIG_HEADERS= /bin/ksh ./config.status
creating include/jit/jit-defs.h
gmake[3]: Leaving directory `/pkgbuild/devel/libjit/work/libjit-0.0.2/include/jit'
gmake[3]: Entering directory `/pkgbuild/devel/libjit/work/libjit-0.0.2/include'
gmake[3]: Nothing to be done for `all-am'.
gmake[3]: Leaving directory `/pkgbuild/devel/libjit/work/libjit-0.0.2/include'
gmake[2]: Leaving directory `/pkgbuild/devel/libjit/work/libjit-0.0.2/include'
Making all in tools
gmake[2]: Entering directory `/pkgbuild/devel/libjit/work/libjit-0.0.2/tools'
cd .. \
  && CONFIG_FILES=tools/Makefile CONFIG_HEADERS= /bin/ksh ./config.status
creating tools/Makefile
gmake[2]: Leaving directory `/pkgbuild/devel/libjit/work/libjit-0.0.2/tools'
gmake[2]: Entering directory `/pkgbuild/devel/libjit/work/libjit-0.0.2/tools'
cc -DHAVE_CONFIG_H -I. -I. -I..    -I../include -I../include 			-I../jit -I../jit -O -c gen-apply.c
cp: cannot access .deps/gen-apply.pp
/bin/ksh: .deps/gen-apply.pp: cannot open
.deps/gen-apply.pp: No such file or directory
gmake[2]: [gen-apply.o] Error 2 (ignored)
/bin/ksh ../libtool --mode=link cc -I../include -I../include 			-I../jit -I../jit -O -R/usr/pkg/lib -o gen-apply  gen-apply.o  -lpthread -ldl -lm 
mkdir .libs
cc -I../include -I../jit -O -o gen-apply gen-apply.o  -L/pkgbuild/devel/libjit/work/.buildlink/lib -lpthread -ldl -lm -R/usr/pkg/lib
./gen-apply >../jit/jit-apply-rules.h
gmake[2]: Leaving directory `/pkgbuild/devel/libjit/work/libjit-0.0.2/tools'
Making all in jit
gmake[2]: Entering directory `/pkgbuild/devel/libjit/work/libjit-0.0.2/jit'
cd .. \
  && CONFIG_FILES=jit/Makefile CONFIG_HEADERS= /bin/ksh ./config.status
creating jit/Makefile
gmake[2]: Leaving directory `/pkgbuild/devel/libjit/work/libjit-0.0.2/jit'
gmake[2]: Entering directory `/pkgbuild/devel/libjit/work/libjit-0.0.2/jit'
/bin/ksh ../libtool --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I..    -I../include -I../include -I. -I. -O -c jit-alloc.c
mkdir .libs
 cc -DHAVE_CONFIG_H -I. -I.. -I../include -O -Wp,-MD,.deps/jit-alloc.pp -c jit-alloc.c  -KPIC -DPIC -o .libs/jit-alloc.o
 cc -DHAVE_CONFIG_H -I. -I.. -I../include -O -Wp,-MD,.deps/jit-alloc.pp -c jit-alloc.c -o jit-alloc.o >/dev/null 2>&1
/bin/ksh: .deps/jit-alloc.pp: cannot open
/bin/ksh: .deps/jit-alloc.pp: cannot open
/bin/ksh ../libtool --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I..    -I../include -I../include -I. -I. -O -c jit-apply.c
 cc -DHAVE_CONFIG_H -I. -I.. -I../include -O -Wp,-MD,.deps/jit-apply.pp -c jit-apply.c  -KPIC -DPIC -o .libs/jit-apply.o
"jit-apply-rules.h", line 1: #error: "gcc is required to detect the apply rules"
cc: acomp failed for jit-apply.c
gmake[2]: *** [jit-apply.lo] Error 1
gmake[2]: Leaving directory `/pkgbuild/devel/libjit/work/libjit-0.0.2/jit'
gmake[1]: *** [all-recursive] Error 1
gmake[1]: Leaving directory `/pkgbuild/devel/libjit/work/libjit-0.0.2'
gmake: *** [all-recursive-am] Error 2
*** Error code 2

Stop.
bmake: stopped in /usr/pkgsrc/devel/libjit
*** Error code 1

Stop.
bmake: stopped in /usr/pkgsrc/devel/libjit
BULK> libjit-0.0.2 was marked as broken:
-rw-r--r--   1 root     other      14652 Jul  6 02:49 .broken.html
/usr/pkg/bin/bmake deinstall
===> Deinstalling for libjit
BULK> Marking all packages which depend upon libjit-0.0.2 as broken:
BULK> Build for libjit-0.0.2 was not successful, aborting.